MAX DISTANCE BETWEEN CENTERS........122"
MAX SWING OVER TABLE................25.5"
MAX WEIGHT BETWEEN CENTERS..........2,420 lbs.
MAX WEIGHT OF CHUCKED WORK PIECE....2,600 lbs.
WHEELHEAD SWIVEL....................+/-45 DEGREES
SIZE OF GRINDING WHEEL..............24" X 4" X 8" BORE
WHEEL SPINDLE MOTOR DRIVE...........15 HORSEPOWER
WORKHEAD SPEEDS.....................10 TO 500 RPM(INF VARI)
WORKHEAD SWIVEL ANGLE...............0 TO 90 DEGREES
COARSE INFEED AT EACH END OF TABLE TRAVERSE0.01 TO 0.05 mm
FINE INFEED AT EACH END OF TABLE TRAVERSE.0.005 TO 0.01 mm
PLUNGE INFEED RATE RANGE............0.01 TO 5mm/MINUTE
SPARK OUT PERIOD.0 TO 30 SECONDS OR 0 TO 9 TRAVERSE PASSES
TABLE TRAVERSE RATE RANGE4 TO 157 IPM (INFINITELY VARIABLE)
TABLE SWIVEL (EITHER WAY)...........+5 DEGREES, -1 DEGREE
FOOTSTOCK QUILL STROKE AND TAPE.....40mm; #5
INTERNAL GRINDING SPINDLE
DRIVE MOTOR........................2 HORSEPOWER
EQUIPPED WITH:
14" THREE JAW CHUCK
14" FACE PLATE
TABLE -MOUNTED RADIUS WHEEL DRESSER
BACK RESTS (2)
10" THREE POINT STEADY REST
HYDRO-DYNAMIC WHEEL SPINDLE BEARINGS WITH SEPARATE HYDRAULIC RESERVOIR.
AIR-ASSIST FOR MOVEMENT OF WORK HEAD,
FOOT STOCK, WHEEL HEAD SWIVEL, AND TABLE
ELECTRONIC DYNAMIC WHEEL BALANCING
SWING DOWN INTERNAL GRINDING SPINDLE
PAPER MEDIA AND MAGNETIC DRUM COOLANT SEPARATOR.
COOLANT TANK AND PUMP.
6" THREE POINT STEADY REST
TABLE-MOUNTED SWIVEL WHEEL DRESSER
WHEEL BALANCING ARBOR
WHEEL MOUNTING LIFTING BRACKET
MACHINE LEVELING WEDGES
FULL SET OF MACHINE MANUALS
