YEAR NEW.......... 1994
Max.
Swing.....................................................................17.1"
Max. Machining
Diameter..............................................9.06"
Distance Between
Standard Chuck Jaws of Main & 2nd Spindle..................17.9"
Max. Bar Work
Diameter...............................................1.65"
X-Axis
Stroke...................................................................6.3"
Z-Axis Stroke...................................................................17.93"
Spindle
Speed...................................................................35 - 6000 RPM
Main Spindle
Nose...........................................................A2-5
Spindle
Bore.....................................................................2.05"
Min. Spindle Indexing
Increment.....................................0.001 Degree / 360,000 Positions
Turret
Type.......................................................................Dodecagonal Drum
Turret Tool
Capacity.........................................................12 / Modified VDI
2nd Spindle
Speed.............................................................180 - 6000 RPM
Rotary Tool
Speed.............................................................120 - 3000 RPM
Rapid Traverse Rate
X & Z
Axis........................................................................1180 IPM
C
Axis................................................................................100 RPM
B
Axis................................................................................708 RPM
Main Spindle Drive
(30 Min)............................................. AC 15 HP
2nd Spindle Drive
(10 Min)............................................... AC 7.5 HP
Rotary Tool Drive
(10 Min)............................................... AC 3 HP
Floor Space
Requirements.................................................105.3" x 57.7"
Machine
Weight................................................................. 8,490 Lbs.
EQUIPPED WITH:
Mazatrol T-32-3J
Control
Tool Eye System
6 Inch Chuck on Main
Spindle
5 Inch Chuck on Sub
Spindle
Synchronized
Spindles
(3 Milling Heads. 2-Horizontal, 1-Vertical)
Auto Cell System
Including Chucker Cell with Pitch Feed Conveyor Package:
GL50-N Gantry Robot
Robot Hand Type “D1”
Robot Hand Jaw Type “A”
Pitch Feed Conveyor With 5 Pallets for Chuck Work
Robot Interface
Automatic Top Door Open/Close
Automatic Chuck Jaws Open/Close
Chuck Air Blast (Main and Second Spindles)
Auto Power Off (Breaker Trip)
MAC GL Robot Controller With Teach Pendant
Chip
Conveyor
Operation
Status Lights
Safety
Fence
