YEAR NEW......... 2008
Swing over bed 29.5" Swing over carriage 23.6"
Max bar capacity (2.55” right spindle w/ work ejector) 2.625”
Max turning dia., main spindle (lower turret) 21.25" (11.89”)
Max permissible weight (including chuck) chuck work/shaft work 264 / 1322 lbs.
Max turning length 40.15” Distance btw’n main & subspindle nose 52.5”
LEFT AND RIGHT SPINDLE:
Chuck size 8” Spindle speed 5,000 RPM
Spindle nose ASA-A2-6 Spindle bore diameter 2.99"
Left / Right spindle drawtube I.D. 2.68” / 2.559” Max spindle torque (15% ED) 234 ft-lbs
AC high torque spindle motor (30 min. rating) 30 HP
LEFT (MAIN) AND RIGHT SPINDLE C-AXIS:
Min programmable angle (deg) .001 Rapid traverse rate (RPM) 400
MILLING SPINDLE
Spindle speed 12,000 RPM Motor power (10 min. rating) 25 HP
B-axis (tilt) coupling increment 5 deg. B-axis travel 240 (+/- 120) deg.
B-axis minimum increment 0.001 deg
BED, SADDLE, & CROSS SLIDE:
X1 (upper) axis travel 22.24” X2 (lower) axis travel 7.36”
Z1 (upper) and Z2 (lower) axis travel 41.3” X1 axis rapid traverse rate 1,417 IPM
Z1 axis rapid traverse rate 1,417 IPM X / Z axis ball screw diameter 1.42" / 1.57”
Y-AXIS:
Y-axis travel 6.7” (+/- 3.35) Y-axis rapid traverse rate 1,024 IPM
ATC:
Tool holder type CAPTO-C6 Tool storage capacity Cam 40 (Opt. 80)
Tool selection method Fixed
TURRET – LOWER:
Number of tools 12 Tool holder type BMT 55P
Turning tool shank size 1.0" Boring bar diameter 1.5"
Tool selection Bi-directional
ROTATING TOOLS LOWER TURRET:
RPM 5,000 RPM Spindle motor (25% ED) 7.5 Hp
Torque (25% ED) 34.7 ft-lbs. Collet type ER-25
Milling collet capacity .079” to .625"
GENERAL:
Floor space (length x width) 191” x 97.5” Net weight 26,455 lbs
Machine height 111” Voltage required 205 - 235 volt / 3 phase
Power requirement 87 kVa (228 amps @ 220 volts)
