YEAR NEW..... 2008
TRAVELS
X Axis................................ 40 " 1016 mm
Y Axis................................ 16 " 406 mm
Z Axis................................ 16 " 406 mm
Spindle Nose to Table................. (~ min) 4 " 102 mm
Spindle Nose to Table................. (~ max) 20 " 508 mm
TABLE
Length................................ 57.75 " 1466.9 mm
Width................................. 10.5 " 267 mm
T-Slot Width.......................... 5/8 " 16 mm
T-Slot Center Distance................ 4.00 " 101.6 mm
Number of Std T-Slots................. 3
Max Weight on Table (evenly distributed)SPINDLE
Max Rating............................ 7.5 hp 5.6 kW
Max Speed............................. 4000 rpm 4000 rpm
Max Torque............................ 33 ft-lb @ 1200 rpm
Drive System.......................... Direct Speed, Belt Drive
Taper................................. 40
Bearing Lubrication................... Grease packed
Cooling............................... Air Cooled
FEEDRATES
Rapids on X........................... 200 in/min 5.1 m/min
Rapids on Y........................... 200 in/min 5.1 m/min
Rapids on Z........................... 200 in/min 5.1 m/min
Max Cutting........................... 200 in/min 5.1 m/min
AXIS MOTORS
Max Thrust X.......................... 2000 lb 8896 N
Max Thrust Y.......................... 2000 lb 8896 N
Max Thrust Z.......................... 2000 lb 8896 N
ACCURACY
Positioning........................... (▒) 0.0004 " 0.010 mm
Repeatability......................... (▒) 0.0002 " 0.005 mm
EQUIPPED WITH:
Rigid tap
Haas Intuitive Programming
Optional Chip Guarding
4th Axis ready
