AUTOMATIC STORAGE/RETRIEVAL SYSTEM (AS-748) SPECIFICATIONS
SHEET SIZE (MAX)....................... 48" X 96"
(MIN)....................... 11.8" X 29.5"
MATERIAL THICKNESS..................... .024" - .135"
NUNBER OF SHELVES...................... 7
LOADING WEIGHT......................... 2 TONS PER SHELF
STACKING HEIGHT........................ 10.24"
LIFTING SPEED.......................... 15.4'(MIN)
FEED RATE.............................. 16.4'(MIN)
LIFTING MOTOR.......................... 5 HP GERAED WITH BRAKE
TRAVEL MOTOR........................... 1/2 HP
TURRET PUNCH PRESS SPECIFICATIONS
VELA II 305050:
CAPACITY....................... 33 US TONS
STROKE......................... 1 1/4"
MAXIMUM SHEET THICKNESS........ 1/4" MILD STEEL
MAXIMUM HOLE DIAMETER.......... 4 1/2"
MAXIMUM SHEET SIZE............. 50" X 50" W/0 REPOSITIONING
THICK TURRET CONFIGURATION..... 58 STATIONS WITH 2 AUTO INDEX
1 1/4" DIA.
TURRET SPEED................... 30 RPM BI-DIRECTIONAL
SPEED.......................... 350 SPM
HIT RATE....................... 200 HPM ONE 1' CENTER
NIBBLING HIT RATE.............. 350 HPM
AXIS SPEED..................... 1968 IPM
CONTROL........................ FANUC 6M
EQUIPPED WITH:
TOOL BALANCER
HYDRAULIC WORK CLAMPS
5 HP MAIN DRIVE MOTOR
X & Y AXIS DC SERVO MOTOR DRIVE
TURRET DC SERVO MOTOR DRIVE
ELECTRIC FOOT SWITCH OPERATION
AIR SUPPLY 80 PSI
ELECTRIC POWER 15 KVA
BLANKING SHEAR SPECIFICATIONS
BLS6090 III
MAX WORKSHEET SIZE..................... 96" X 48"
MAX WORKSHEET THICKNESS................ .135 (MILD STEEL)
MAX CUTTING DIMENSIONS................. 35.43" X 23.6"
MAX PROGRESSIVE CUTTING................ 96" X 19.7"
MAX PART SIZE.......................... 96" X 48"
RAKE ANGLE
X AXIS UPPER BLADE................... 0 DEGREE 50' (108" PER FT
Y AXIS UPPER BLADE................... 0 DEGREE 50' TO 1 45'
STROKES PER MINUTE................... 75 SPM
STROKE LENGTH........................ 26.1"
CUTTING RATE P.M..................... 45 (5.5" FEED)
NO. OF REPOSITIONING HOLDDOWNS....... 3 X AXIS 3 Y AXIS
PROGRESSIVE CUTTING LENGTH........... 23.6"
MAX. FEED RATE....................... 2000" MIN
NO. OF WORK CLAMPS................... 3
DEAD ZONE............................ 1.575"
TRAVEL RANGE OF X AXIS............... -.400" TO 72.0"
TRAVEL RANGE OF Y AXIS............... -.400" TO 55.1"
CONTROL.............................. FANUC 6M
TABLE WEIGHT......................... 6.6 TONS
BLS LOADER/UNLOADER AND STACKER
MODEL L-UL 48 MOTORIZED SYSTEM
48" X 98" SCISSORS LIFT ON RAILS
CAPACITY: 12"-48" WIDTH
30"-96" LENGTH
SORTING-TEN POSITIONS:
POSITION 1:
FOR PARTS LARGER THAN 2.0" X 2.0", BUT SMALLER THAN 10.0" X 39.37"
POSITION 2:
FOR SCRAP LARGER THAN 0.2" X 0.2", BUT SMALLER THAN 39.37" X 39.37"
POSITION 3,4, AND 5:
FOR PARTS LARGER THAN 10" X 10", BUT SMALLER THAN 18" X 39"
POSITION 6,7,8, AND 9:
FOR PARTS LARGER THAN 18" X 18", BUT SMALLER THAN 39.37" X 50"
POSITION 10:
THE BLS UNLOADER WILL UNLOAD ANY PART LARGER THAN 39.37", IN THE Y AXIS ONTO THE SHEAR LIFTER TABLE WHICH WILL AUTOMATICALLY ADJUST ITS HEIGHT USING PHOTO ELECTRIC SENSORS.
NOTE: FMS SYSTEM COMES COMPLETE WITH ORIGINAL AMADA LINE CONTROL SOFTWARE AND HARDWARE.
