SERIAL NUMBER 31202-009
MANUFACTURED IN 1980
CAPACITY:
DISTANCE BETWEEN CENTERS.........39.37"
HEIGHT OF CENTERS................6.88"
MAXIMUM SWING OVER TABLE.........13.74"
MAXIMUM SWING OVER TABLE FOR
15.75" DIA GRINDING WHEEL.......13.74"
TABLE:
MAXIMUM TRAVEL...................43.30"
TRAVERSE PER REVOLUTION OF
HANDWHEEL, COARSE/FINE..........20/2,5 mm TRAVERSE SPEEDS, HYDR.,
INFINITELY VARIABLE, APPROX.....0,02-6m/min
MIN.MOVEMENT NECESSARY TO
REVERSE TABLE...................1.5mm
DWELL OF REVERSAL, INF.VARIABLE..0-5sec
MAXIMUM SWIVEL...................9 degree
WHEELSLIDE:
MAXIMUM TRAVEL...................10.62"
INFEED PER REVOLUTION OF
HANDWHEEL, COARSE/FINE..........4/0,5mm
RAPID ADVANCE & WITHDRAWAL, HYD..1.96"
ELECTRO-MECHANICAL INFEED
CONTROL BY STEPPING MOTOR.......0-9.99mm
*PLUNGE GRINDING:ROUGHING/FINISHING
*AUTOMATIC CYCLE RETURN
*SPARKING (SECONDS OR STROKES)...0-99
WHEELHEAD:
GRINDING WHEEL ODxWIDTHxHOLE.....400x63x127mm
SPINDLE SPEEDS(RPM)..............1530,1750,2040
WORKHEAD:
SWIVEL...........................360 degrees
SPEEDS,INFINITELY VARIABLE.......20 - 400RPM
INTERNAL TAPER OF SPINDLE........#5 MORSE
TAILSTOCK:
INTERNAL TAPER OF QUILL..........#3 MORSE
QUILL RETRACTION.................30 mm
MOTORS:
WHEELHEAD(3000RPM)...............4,4 kW
WORKHEAD (150-3000 RPM)..........0,9 Kw
OIL PUMP MOTOR (3000 RPM)........0,75 Kw
COOLANT PUMP.....................0,1 Kw
POWER REQUIREMENTS...............8 Kw
APPROX. WEIGHT...................6,900 LBS
INCLUDES:
*MARPOSSE AUTOMATIC GAUGING SYSTEM
*FLOOD COOLANT SYSTEM WITH PAPER FILTER
EQUIPPED WITH:
SWING AROUND INTERNAL ATTACHMENT (DOES NOT HAVE INTERNAL SPINDLE)
MARPOSE AUTOMATIC GAUGING
FLOOD COOLANT SYSTEM WITH PAPER FILTER
