INSTALLED NEW....... 2008
********PRICE IS "ON LOCATION, PRIOR TO REMOVAL (BY 6-16-14)********
MAXIMUM SWING (TOOL EYE MAY LIMIT)
30"
MAX SWING USING Y AXIS
26" - 30"
MAX SWING OVER CROSS SLIDE
30"
MAX CUTTING DIAMETER: CHUCKING
30"
MAX CUTTING LENGTH
60"
MAX DISTANCE BTW CHUCK FACES
60.2"
MAIN SPINDLE SPECIFICATIONS (L/R)
SPINDLE NOSE
A2-8
SPINDLE BORE
3.46"
SPINDLE BAR WORK
3.0"
SPINDLE SPEED
4,000 RPM
SPINDLE INDEX (PROGRAMMABLE)
0.0001/0.001 DEG
SPINDLE HORSEPOWER
30 (CONT)
SPINDLE TORQUE
534/368 FT-LBS
TURRET & TOOLING SPECIFICATIONS
TYPE OF TURRET
1 POS. WITH ATC
MAGAZINE CAPACITY CAPTO 40
ROTARY TOOL SPINDLE SPEED
12,000 RPM
ROTARY TOOL SPINDLE HP
25 AC
AXIS TRAVELS (B)
225 DEG (0.0001 INCREMENTS)
(Y)
+/- 4.53"
(X)
24.8"
(Z)
62.41"
(W) SECOND HEADSTOCK
60.24"
AXIS RAPID RATES (Y/X,Z/W)1024/1496/1181 IPM
MACHINE WEIGHT
28,660 LBS
EQUIPPED WITH:
MAZATROL MATRIX CONTROL
Y AXIS
B AXIS POSITIONING 225 DEG IN 0.0001 DEG INCREMENTS
B AXIS INDEX 5 DEG (COUPLING CLAMP)
(C) AXIS MAIN AND SECOND SPINDLE DRIVE PACKAGE (0.0001 DEG INCREMENTS)
12.4" QUICK JAW CHANGE CHUCK ON 1ST SPINDLE
8.8" QUICK JAW CHANGE CHUCK ON SECOND SPINDLE
DRAW TUBE 2ND SPINDLE FOR 2.9" DIA. X 11" DEPTH
1ST AND 2ND SPINDLE SYNCHRONIZATION
CHUCK AIR BLAST ON 1ST SPINDLE
PREP FOR 1,000 PSI SUPERFLOW
MAXAK SUPER FLOW 12 VARIABLE HIGH PRESSURE COOLANT
40 CAPTO TOOL MAGAZINE
DUCT ONLY FOR MIST COLLECTOR
UP TURRET AIR BLAST
COOLANT AND AIR FOR CHUCK JAWS (FIRST SPINDLE)
RE THREADING FUNCTION
THREAD START POINT FUNCTION
C1-C2 SYNCHRONOUS OPERATION FUNCTION
EIA/ISO 1ST SPINDLE & MILL SPINDLE INDIVIDUAL ROTATION
HIGH SMOOTHING CONTROL
FINE SPLINE INTERPOLATION (EIA)
EIA/ISO FUNCTION SIMULTANEOUS 5 AXIS
TOOL TIP POINT CONTROL/SIMULTANEOUS 5 AXIS
TOOL RADIUS COMPENSATION/5 AXIS
MAX PROGRAM SIZE 8 MEGA BYTES
OPTIMIZER TECHNICAL LIBRARY
COOLANT SYSTEM
CHIP CONVEYOR SIDE DISPOSAL (HINGE)
*********OUT OF A RESEARCH FACILITY, NO PRODUCTION*********
